The rupture conventionnelle is the only way to end a French permanent contract by mutual agreement: neither a dismissal nor a resignation. It carries a severance payment and opens entitlement to unemployment benefit, which explains its popularity — but it follows a strict procedure, and its cost changed in 2026: the specific employer contribution rose from 30 % to 40 %. This guide covers the procedure and the two deadlines that drive the calendar, how the minimum severance payment is calculated, the social and tax treatment of the sums paid on both sides, and the waiting periods that delay unemployment benefit.
What it is, and what it is not
The individual rupture conventionnelle applies only to employees on a CDI (permanent contract). It is excluded for a CDD (fixed-term contract), a temporary agency contract and an apprenticeship contract, and it cannot be concluded during the probationary period, where either side may already terminate freely. A private individual acting as an employer may use it; a registered childminder (assistante maternelle) cannot sign one.
It rests on the free and informed consent of both parties. Neither can impose it on the other, and neither is obliged to answer a request, even one repeated by registered letter. Conversely, it remains available while the contract is suspended: sick leave, work accident, maternity leave, parental leave, sabbatical.
Two important limits. It is available in a company in economic difficulty, but it must not be used to circumvent the redundancy procedure and the protections attached to it. And it cannot be offered under a GPEC agreement, a redundancy plan (PSE) or a collective termination agreement — those schemes have rules of their own.
The procedure: at least one meeting, then an agreement
The request follows no particular form: it may be oral or written, and may come from either the employer or the employee. The parties must then meet for at least one interview, which settles the end date of the contract and the amount of the payment. The invitation has no prescribed form, but writing is advisable: it is the proof that the meeting took place.
The employee may be assisted. Where the company has no staff representatives, the invitation must say so and state that the employee may be assisted by another employee or by a conseiller du salarié, with the contact details of the town hall and the labour inspectorate where the list can be found. The employer may be assisted only if the employee is — by someone from the company, and, below 50 employees, possibly by a member of its employers' union or another employer in the same branch. Each party must tell the other before the meeting.
The agreement is drawn up on the TéléRC online service, then printed in three copies, signed and dated by hand. Three statements are mandatory: the end date of the withdrawal period, the termination date of the contract, and the amount of the specific severance payment. One dated and signed copy must be handed to the employee: an employer who keeps both copies risks the termination being annulled and owing the compensation due for a dismissal without real and serious cause. The paper form (Cerfa no. 14598) is still accepted exceptionally, where one of the parties is unable to use the online service.
The two deadlines that drive the calendar
Between signature and actual departure, two periods run one after the other; they do not overlap.
- Withdrawal: 15 calendar days. It runs from the day after signature, and either party may withdraw without giving a reason, by registered letter with acknowledgement of receipt or by hand delivery against receipt. If the last day falls on a Saturday, Sunday, public holiday or non-working day, the deadline moves to the next working day.
- Approval (homologation): 15 working days. The application is filed with the labour administration (DDETSPP) from the day after the withdrawal period ends, through TéléRC. The review period runs from the day after the file is received. Administrative silence counts as approval; a refusal must give reasons — a missing step, for instance, or a payment below the statutory minimum.
The contract therefore cannot end before the day after approval. Throughout that period the employee keeps working normally, and sick leave or holidays do not push back the agreed end date. There is also no notice period: the termination date is the one the parties set.
Protected employees (works council members, union representatives, local representatives and others) are a separate case: the agreement requires the authorisation of the labour inspector rather than approval. TéléRC cannot be used, the works council must be consulted, and here silence works the other way round: with no answer within 2 months, the application is deemed refused. An appeal then goes to the minister responsible for labour, within 2 months.
The severance payment: the statutory floor
The employee receives a specific severance payment, due whatever their length of service. The amount is negotiated, but it cannot be lower than the statutory redundancy payment — and if the collective agreement, the employment contract or established company practice provides a more favourable calculation, the higher amount applies.
The statutory redundancy payment is based on the reference salary, defined as whichever is more favourable between the monthly average of the last 12 months and that of the last 3 months (in the second case, an annual bonus counts as one twelfth per month). The scale is then:
- one quarter of a month's pay per year of service up to 10 years;
- one third of a month's pay per year of service beyond 10 years;
- incomplete years count pro rata to the number of complete months.
Example. An employee with 6 years' service and a reference salary of €3,000 gross a month: 3,000 × 1/4 × 6 = €4,500 as the minimum payment. With 12 years and 9 months' service at the same salary it would be (3,000 × 1/4 × 10) + (3,000 × 1/3 × 2.75) = €10,250. To convert a monthly gross figure into net, our gross-to-net salary guide sets out the mechanics line by line.
What the payment costs the employer in 2026
This is what changed this year, and it is rarely anticipated. The share of the payment that is exempt from social contributions bears a specific employer contribution whose rate rose from 30 % to 40 % in 2026. It applies to payments made in respect of a termination ending after 1 January 2026, is collected for the national old-age insurance fund (Cnav), and is declared under personnel type code (CTP) 719. The forfait social, on the other hand, is not due.
In the example above, the €4,500 statutory payment is entirely exempt from contributions, so the employer contribution comes to 40 % × €4,500 = €1,800. At the 30 % rate that applied until 2025 it would have been €1,350: the same termination now costs the employer €450 more. This is not to be confused with ordinary contributions on salary, which our employer contributions simulator prices, nor with the overall cost of a post, set out in what an employee really costs an employer.
The exemption from contributions is not unlimited. It applies up to the highest of the three amounts below, and within a cap of twice the annual social security ceiling — €96,120 in 2026 (the PASS being €48,060; see our article on the social security ceiling):
- the statutory or collectively agreed redundancy payment;
- half of the total payments made;
- twice the gross pay received in the year before the termination.
Above that, the excess is subject to contributions. And if the payment exceeds ten times the PASS (€480,600 in 2026, or five times the PASS where it is combined with compensation for the loss of a corporate office), it is subject to contributions in full, with no exemption at all.
Negotiating above the minimum: the CSG/CRDS effect
Take the same employee, but with a payment negotiated at €9,000 instead of the statutory €4,500, on gross pay of €36,000 in the previous year.
- Social contributions: the highest of the three thresholds is twice the annual pay, €72,000 — well above the payment and below the €96,120 cap. The €9,000 is therefore exempt from contributions.
- CSG/CRDS: the exemption is capped at the lower of the two thresholds — the statutory payment (€4,500) or the share not subject to contributions (€9,000). So the €4,500 paid above the statutory minimum is subject to CSG/CRDS, at 9.70 % and without the 1.75 % allowance for professional expenses: €436.50 withheld from the employee.
- Employer contribution: 40 % of the share exempt from contributions, so 40 % × €9,000 = €3,600. The total cost of the termination for the employer reaches €12,600 for €9,000 paid out.
In other words: every euro negotiated above the statutory minimum costs the employer €1.40, and reaches the employee 9.70 % lighter.
One special case is worth flagging: where the employee is entitled to a full-rate retirement pension at the date of termination, the payment is subject to CSG and CRDS in full, from the first euro, without the 1.75 % allowance. The exemption thresholds described above then no longer apply.
Income tax on the employee's side
For tax, everything turns on one question, assessed on the day the contract ends: can the employee draw a retirement pension from a statutory scheme?
If they can, the payment is taxable from the first euro. That is decisive for a termination negotiated at the end of a career. If they cannot, the share matching the statutory or collectively agreed minimum is fully exempt; above that, the exemption is limited to the higher of twice the previous year's gross pay or half the payment, with an absolute cap of €288,360 in 2026 (six times the PASS). In our €9,000 example, the payment is therefore entirely exempt from income tax. For how the tax itself is collected, see our article on withholding tax at source.
Unemployment benefit: an entitlement, but not straight away
A rupture conventionnelle is expressly treated as involuntary loss of employment: it opens entitlement to the return-to-work allowance (ARE), provided the employee has worked at least 6 months (130 days or 910 hours) in the last 24 months for someone under 53, has registered with France Travail within 12 months of the end of the contract, and is actively looking for work.
But payment does not start the day after departure. Three periods add up: a 7-day waiting period, a paid-holiday deferral equal to the holiday pay in lieu divided by the reference daily wage, and above all a specific deferral on the part of the payment above the statutory minimum. That deferral equals the above-statutory amount divided by 107.9, rounded up to the next whole number, capped at 150 calendar days.
In our €9,000 example, the above-statutory share is €4,500: 4,500 ÷ 107.9 = 41.7, rounded to 42 days, to which the 7-day waiting period is added. Benefit would therefore begin 49 days after the contract ends. That is the trade-off to keep in mind when negotiating upwards: a more comfortable payment delays the first ARE instalment by just as much.
Final pay and documents
On the termination date the employer pays everything owed — salary, bonuses — plus holiday pay in lieu for leave accrued and not taken, which does remain subject to contributions as an ordinary element of pay. The employer must hand over the certificat de travail (employment certificate), the France Travail certificate and the receipt for the final balance, and, where an employee savings scheme exists, a statement of the sums saved.
Finally, the termination can be challenged before the labour court (conseil de prud'hommes) within 12 months of the date of approval or of refusal of approval, by the employer as well as the employee. Consent that was not free — pressure, harassment, the threat of dismissal — leads to the agreement being annulled and reclassified as a dismissal without real and serious cause.
Key points
The calendar first: 15 calendar days to withdraw, then 15 working days for approval, with administrative silence counting as consent, and termination no earlier than the day after approval. Then the payment: never less than the statutory redundancy payment, that is one quarter of a month per year up to 10 years and one third beyond. And the two 2026 figures not to miss: the specific employer contribution at 40 % of the share exempt from contributions, and the specific deferral of unemployment benefit, which pushes back the ARE by one day per €107.9 paid above the statutory minimum.
To price the pay that the calculation is based on, from either the employee's or the employer's side, run our simulator: it details every contribution line on the salary you enter.
Official sources
- service-public.gouv.fr — Rupture conventionnelle for a private-sector employee (procedure, meetings, assistance, withdrawal, approval, protected employees, documents handed over)
- service-public.gouv.fr — How is the specific rupture conventionnelle payment calculated? (statutory floor, tax and social treatment, the 40 % employer contribution)
- service-public.gouv.fr — Redundancy payment for an employee on a permanent contract (the 1/4 and 1/3 scale, reference salary, pro rata)
- Urssaf — Rupture conventionnelle payments (exemption thresholds, CSG/CRDS without the allowance, the move from 30 % to 40 %, CTP 719, no forfait social)
- service-public.gouv.fr — Return-to-work allowance (ARE): conditions, the 7-day waiting period, the specific deferral and the division by 107.9
- service-public.gouv.fr — CSG and CRDS on earned income (9.2 % CSG and 0.5 % CRDS on salaries, bonuses and miscellaneous allowances)
- Légifrance — Code du travail, articles L1237-11 to L1237-16 (rupture conventionnelle)
- TéléRC — Online service for filing a rupture conventionnelle approval request